Characteristic：

The film blowing machine is used for blowing low density polyethylene (LDPE), high density polyethylene (HDPE) and linear low density polyethylene (LLDPE) plastic films, and is widely used for packing textiles and industrial products. The film machine adopts three stage reducer hardened special reducer, high efficiency low noise plastic extrusion screw machine double alloy barrel length diameter ratio, uniform temperature distribution, plasticizing capacity, raw material melting, blowing film for smooth symmetry. The user can select double section, double roll and rotating head.

Usage method

Check the temperature controlled condition, heating appliances in good condition, pay attention to adjust the heating temperature in the index range in time.

Check the traction speed control film thickness

3 to observe and adjust the film thickness uniformity, folding size standard.

The inspection of the air storage cylinder pressure is not too high, but due to standby pressure.

The check and control the ratio of raw materials mixed evenly.

The inspection of raw materials has no impurities, especially should check with the iron magnet.

But check the gear box and the air compressor cylinder lubricating oil lubrication.

The regular inspection of the operating temperature of the motor and mechanical transmission.

The appearance, technical parameters, performance and features of the machine are subject to change without notice. Without the express written permission of Ruiguang company, may be reproduced or the dissemination of relevant information